Automatic Truck car wash machine
$26000-29000 /Set/Sets
Payment Type: | T/T,L/C |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean,Land |
Port: | Tianjin port,Qingdaoport |
$26000-29000 /Set/Sets
Payment Type: | T/T,L/C |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Set/Sets |
Transportation: | Ocean,Land |
Port: | Tianjin port,Qingdaoport |
Model No.: T4
Brand: SHINEWASH
Species: Car Washer
Place Of Origin: China
The Truck Wash is designed for trucks, buses, large container trucks, construction vehicles and other vehicles with intelligent and automatic vehicle washing functions. It is suitable for bus and passenger systems, logistics systems and various vans. The equipment is controlled by an electronic control (French Schneider PLC programmable controller) system for the automatic operation of the whole set of equipment. The machine can realize the continuous washing, brushing and reuse of wastewater (optional) for vehicles in an efficient and fast way.
The fully electromechanical control system is installed in the electrical control cabinet of the frame and realises the automatic control of the car wash by means of an electrically operated workbench. The core of the control system is the programmable controller, which is detected by photoelectric sensors and proximity switches and controlled by current sensors to realise the automatic program for brush sets, water spraying and walking. The programmable controller and the main electrical components such as photoelectric sensors, photoelectric switches and current sensors are imported international famous brands to ensure the reliability of the whole machine performance.
The frame of the car wash is made of steel with sandblasting, zinc spraying and plastic spraying treatment. The outside of the frame is covered with stainless steel plates and consists of four parts: left and right columns, base and top frame.
Car wash configuration with combined cleaning brush.
Four brushes: two large standing brushes and two skirt brushes to clean the front, sides and rear of the vehicle.
The new foam bristles used by the company are solid, non-porous, soft and safe, non-damaging to the paintwork, non-muddy, non-absorbent, non-tangle, anti-ageing and wear-resistant. The brush tubes are made of special aluminium alloy, which is lightweight and durable.
The structural frame of the car wash is equipped with a water barrier, which is made of a stainless steel skeleton with a new type of resistant board, which is both beautiful and sturdy.
Model | T4 |
Applicable models | Various types of bus vehicles |
Car wash size | Length ≤ unlimited x width ≤ 3 x height ≤ 4 |
Machine size | Length 8m x Width 5m x Height 5.3m |
Equipment power | 19KW |
Dali Brush | 2pcs |
Skirt brush | 2pcs |
Cleaning capacity | 2 to 3 minutes/vehicle |
Power supply power | 380V 50Hz |
Power consumption | 0.5 degrees/vehicle |
Amount of water used | 150L-200L/vehicle |
Air pressure | 0.7Mpa |
Cleaning options | Normal wash, detergent |
Mode of operation | Automatic control, manual control |
Waste water recycling equipment (optional) | |
Power consumption | 1.5KW |
Effluent recovery rate | Recovery rate 90%, 10L-15L/ single vehicle water consumption |
Operating temperature | 0-50°C |
Sewage inlet pipe diameter | Galvanised 50mm |
The machine is controlled by PLC as the core, with strong anti-interference ability. Designed with multiple protection measures, high degree of automation, high reliability, simple operation, stable and reliable work.
Human-machine interface, intelligent touch control operating system, with a number of self-developed sound and light alarm functions, automatic generation of fault information, full Chinese display, convenient human-machine dialogue, easy to find and eliminate faults, with automatic and manual control functions.
The machine has an intelligent mirror avoidance function, so you don't have to worry about tripping over the mirrors; the cleaning tracking brush scrubs the front and rear bumpers in all directions, with no dead angle on the lower slope of the vehicle and 100% cleanliness.
Brush column arm is concentric even shaft hanging design, the structure is more reasonable, spindle and flange specially customized, are more robust than similar products in the market, thick, absolutely will not produce other manufacturers appear brush spindle break off smash car or deformation generated by the spin shaking whacking car body, etc., the machine really do operation and use 100% safe!
This machine in the use of the operation process, if the equipment of a unit of a single unit failure, the machine can be set artificially controlled, shielding to stop the operation of the faulty unit, without affecting the normal operation of the other units of the machinery alone function, does not affect the normal business, to ensure that the user all-day normal use.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.